Name: DUAL FAN Heater for Polaris Ranger XP1000 / 1000 / Crew (2018-2026) Ice Crusher Heater
Brand: Ice Crusher
SKU: ICH215.00
Price: 569.99 USD
Availability: InStock

Product Description
Specifications
Warranty Info

A heater for the Polaris Ranger XP1000 / 1000 / Crew, 2018–2026 — dual fan

This Ice Crusher dual-fan heater kit is built specifically for the Polaris Ranger XP1000, Ranger 1000 and Crew — not a universal heater adapted to fit. It gives you the same 8-vent layout as the Polaris OEM heater kit for a fraction of the price, and the dual fans keep strong airflow at every vent: 18,000 BTU and 320 CFM, including dedicated windshield defrost. The heater unit mounts against the firewall behind the center dash. Because it runs on engine coolant, it makes real heat without draining your battery; the dual fans draw just 2–3 amps.

Prefer the 6-vent single-fan kit? See the 14,600 BTU Ranger kit.

Fits

2018–2026 Polaris Ranger XP 1000
2018–2026 Polaris Ranger 1000
2018–2026 Ranger Crew (XP 1000 Crew and 1000 Crew)
Trail Boss editions of the above

By model year:

2026 Ranger XP1000 / 1000 / Crew
2025 Ranger XP1000 / 1000 / Crew
2024 Ranger XP1000 / 1000 / Crew
2023 Ranger XP1000 / 1000 / Crew
2022 Ranger XP1000 / 1000 / Crew
2021 Ranger XP1000 / 1000 / Crew
2020 Ranger XP1000 / 1000 / Crew
2019 Ranger XP1000 / 1000 / Crew
2018 Ranger XP1000 / 1000 / Crew

Not for: 2017 Ranger XP 1000 (use the 2017 kit), Ranger XP 900 and Mid-Size Rangers. The rear heater add-on fits the XP 1000 Crew only, not the Ranger 1000 Crew.

Fitment note: If your Ranger’s dash has the pre-cut center dash vents with cover plates, please contact us for vent inserts that fit those openings. Call 888-964-0135 or email info@icecrusherheaters.com.

Specs

Heat output	18,000 BTU
Airflow	320 CFM
Vents	8 adjustable, the same layout as the Polaris OEM heater kit, including OEM-style rectangular defrost vents
Windshield defrost	Yes
Fan	Dual; draws 2–3 A
Heater size	12 × 7.5 × 4.5 in
Mounts	Against the firewall behind the center dash
Install time	4–8 hours
Warranty	3 years, whole kit

What’s in the box

Heater unit with fan
8 adjustable vents, including OEM-style rectangular defrost vents
Coolant hose, cut to length for one or two seat rows
Fittings and mounting hardware, plus an under-hood shut-off valve
The specialty tools the install needs
Picture-rich, step-by-step instructions written for the average do-it-yourselfer

Installation

The heater mounts against the firewall behind the center dash, out of the way. You tap into the engine coolant under the hood and route the hose to the heater; the instructions show every step with pictures. Basic hand tools do the job.

Options

Seat rows: Pick one or two rows of seats so we pack the right length of coolant hose. The price doesn’t change.

Polaris Ranger XP 1000, one row of seats — **One row**
Ranger XP 1000

Polaris Ranger Crew XP 1000, two rows of seats — **Two rows**
Ranger Crew XP 1000

In-cab heat control (+$49.99): A control at the dash that sets how much coolant flows through the heater core. Turn the heat up, down or off for summer without reaching under the hood for the shut-off valve.

Optional in-cab heat control: dash control and cable-operated heater valve

Rear heater kit (+$299.99): A second heater for the back seat on the Ranger XP 1000 Crew. It needs this front kit to run.

Optional rear heater installed under the back seat of a Polaris Ranger XP 1000 Crew

Hose clamp tools (+$24.99): A pair of clamp-off pliers that seal hoses up to 2 inches, so the coolant tie-in stays clean. Handy on radiator hoses too.

Optional hose clamp tools: a pair of clamp-off pliers for the coolant tie-in on a UTV cab heater install

Questions we hear

Will it drain my battery?

No. The heat comes from your engine’s coolant, not the battery. The dual fans draw just 2–3 amps of 12-volt power, similar to an OEM blower.

Single fan or dual fan?

Both kits fit the same Rangers. The dual-fan kit moves 320 CFM through 8 vents for 18,000 BTU; the single-fan kit moves 180 CFM through 6 vents for 14,600 BTU. If you run a Crew or ride in deep cold, the dual fan is the one.

Can I turn the heat off for summer?

Yes. The kit includes an under-hood shut-off valve. Add the in-cab heat control and you can turn the heat up, down or off from your seat.

How long does the install take?

Plan on 4–8 hours depending on experience. Experienced do-it-yourselfers land at the low end; first-timers should set aside a full day and follow the picture-rich instructions step by step.

Do I need the hose clamp tools?

You can install without them, but they make the coolant tie-in faster and cleaner. They pinch the hoses shut so coolant doesn’t pour out, and less air gets into the system, which makes bleeding the air out much easier. Sold as a pair; they fit hoses up to 2 inches.

Why buy an Ice Crusher heater

We’re not the cheapest UTV heater. We’re the one designed, supported and shipped by the people who answer the phone. Every kit is built for a specific machine, comes complete, and is backed by real people who know it inside and out. And we keep improving our kits, even when it means retiring our own older designs.

Warranty, support and shipping

3-year warranty on the whole kit, electrical included. If something goes wrong, tell us the problem and we make it right. Tech support is unlimited and free for as long as you own the heater: call 888-964-0135 and a real person in Minnesota answers.

Free shipping in the lower 48. Order by noon CT, Monday through Friday, and it ships the same day. Canada: $30–$50 per heater freight depending on province; duties, taxes and brokerage are extra.

More help: Heater FAQ · Install videos on YouTube

Legacy SKU:: ICCH-UD-C-RNGR18XP1000DF_215

Ice Crusher Heaters warrants your UTV Heater System, including its electrical components (motor, switch, wiring and resistor), to be free from defects in material and craftsmanship under normal use and service by the original consumer purchaser (end user) for a period of Three (3) years from the date of purchase. The warranty is null and void if the system has been damaged by accident, improper installation, unreasonable use, lack of proper maintenance, unauthorized repairs or modifications, or causes not arising from defects in materials and craftsmanship. Ice Crusher Heaters obligations under this warranty are limited to repair of the product at our production facility, or the replacement of the product at Ice Crusher Heaters option and at Ice Crusher Heaters expense. Any expense involved in the removal, re-installation, or transportation of the product is not covered by this warranty. Prior to return of any product to Ice Crusher Heaters, the customer must contact Ice Crusher Heaters customer service, 888-964-0135, email at info@icecrusherheaters.com or fill out the online contact form. The order number must be marked on the exterior of the package for easy identification. Any Warranty product received at Ice Crusher Heaters without an order number may be returned at expense of the sender. Postage must be prepaid, and the original dated proof-of-purchase must be included. Ice Crusher Heaters will not be liable for any damages sustained in transport due to improper packaging or handling. The acceptance by Ice Crusher Heaters of any product returned shall not be deemed as an admission that the product is defective or in any violation of any warranty.