No need to wait – our UTV heater kits ship same-day!

Arctic Cat heater kits built for the Prowler or Wildcat Trail

Ice Crusher builds five heater kits for the Prowler or Wildcat Trail. Each kit is designed around the machine, runs on engine coolant so there is no battery drain beyond the fan, and ships complete with hardware, hose, fittings and picture-rich instructions — backed by unlimited phone support from Minnesota.

Pick your Arctic Cat

Every kit at a glance

MachineYearsKitHeatVentsDefrostPrice
Arctic Cat Prowler Pro2018–2025Prowler Pro Heater Kit14,600 BTU4Yes$399.99
Arctic Cat Prowler HDX2015–2017Prowler HDX Heater Kit14,600 BTU6Yes$499.99
Arctic Cat Prowler 7002009–2015Prowler 700 Heater Kit14,600 BTU5Yes$399.99
Arctic Cat Prowler 5502009–2014Prowler 550 Heater Kit14,600 BTU5Yes$399.99
Arctic Cat Wildcat Trail2012–2019Wildcat Trail Heater Kit14,600 BTU6Yes$499.99

What you get

Contents of the Ice Crusher heater kit for the Arctic Cat Prowler HDX
Example kit contents: Arctic Cat Prowler HDX

Every kit ships the same business day from Minnesota with the heater, vents, hose, fittings, hardware, specialty tools and picture-rich instructions.

Prowler Pro (2018–2025): mounts under the center dash, 4 vents, windshield defrost, 14,600 BTU. Choose one or two rows of seats at checkout.

Prowler HDX (2015–2017): mounts behind the center console, 6 vents, windshield defrost, 14,600 BTU.

Prowler 700 (2009–2015): mounts under the center dash, 5 vents, windshield defrost, 14,600 BTU.

Prowler 550 (2009–2014): mounts under the center dash, 5 vents, windshield defrost, 14,600 BTU.

Wildcat Trail (2012–2019): mounts against the center firewall, 6 vents, windshield defrost, 14,600 BTU.

Installation

Plan on four to eight hours with hand tools, depending on experience. All the hardware, fittings, hose and specialty tools are in the box, and the instructions walk the install step by step with photos. Call 888-964-0135 if you have a question mid-install — unlimited tech support comes with every kit.

Frequently asked questions

What does the MaxStat do, and should I add it?

Ice Crusher MaxStat inline coolant bypass thermostat
The MaxStat

The MaxStat is our inline coolant bypass thermostat. It adds 10 to 15 degrees of cab heat by keeping hot coolant moving through the heater core, and it stops the engine thermostat from cycling open and closed so quickly, so the heat in the cab stays steady instead of rising and falling. It is a checkout option on the Prowler HDX, Prowler 700, Prowler 550 and Wildcat Trail kits.

Does it defrost the windshield?

Yes — every Arctic Cat kit includes defrost vents.

Will it drain the battery?

No. The heat comes from engine coolant; the fan draws about what a factory blower does.

Is everything I need in the box?

Yes. Heater, vents, hose, fittings, hardware, specialty tools and picture-rich instructions, plus unlimited phone support at 888-964-0135.

Do I need the hose clamp-off tools?

Ice Crusher hose clamp-off tools
Hose clamp-off tools

No — you can install the kit without them. But they make the job significantly cleaner and quicker, because you don't have to drain the coolant before cutting into the radiator hoses: clamp the hose off on each side, make the cut, and very little coolant is lost and very little air gets in. They are a $24.99 option at checkout on the kit page.

5 of 5 Items
5 of 5 Items