Are frosted windshields and bone-chilling seats stealing joy from your outdoor activities? Ice Crusher UTV Heaters has you covered! All Ice Crusher Heater Kits are developed with the average Do-It-Yourselfer in mind.
This kit includes all hardware, fittings, hoses, and specialty tools. Picture-rich instructions will guide you step-by-step through installation. With adjustable vents and a high CFM blower, you'll find ample heat to defrost the windshield and heat up your hands and feet.
You'll never be stranded during installation because our Minnesota-based technical support team is ready to help! Put the fun back in your outdoor activities with an Ice Crusher UTV Heater.
UTV Cab Heater Fitment:
| 2018 Wolverine | 2017 Wolverine | 2016 Wolverine |
Heater Features:
- 14,600 BTU output
- CFM: 180
- Heater unit dimensions (10 x 7.5 x 4.5)
- Mounts on passenger side wheel well
- Vents: 6
- Defrost: Yes
- Get 10 to 15 degrees more heat with the addition of the MaxStat
Wolverine Model Option:
Select R-Spec if your vehicle includes adjustable suspension, bucket seats, EPS, etc., and Standard if not.
MaxStat - Inline Coolant Bypass Thermostat Option:
All heaters in the industry perform as a function of how hot the coolant is and how much coolant is flowing through the heater core. As the radiator cools down the engine, it causes the engine thermostat to close, which cuts off all coolant flow to the heater core. The MaxStat adds a secondary inline thermostat (180F Standard) to the vehicle’s coolant system, which diverts coolant to the heater core when the engine thermostat would otherwise have closed down. Essentially it eliminates the thermal cycling that affects almost all heaters in the market. Optional 192F thermostat is available if requested before shipping.
- MaxStat Size: 1" (26mm)
In-Cab Heat Control Option:
This essentially gives you full control over the coolant flow through the heater core. You can turn the temperature up and down or turn it completely off for the summer, without having to reach under the hood to access the shut-off valve that is normally supplied with the heater kit.
Hose Clamp Off Pliers Option:
Make your heater install faster and easier with Ice Crusher Hose Clamp Off Pliers. These clamp off pliers will keep coolant from pouring out of your vehicle when tying into the coolant system. They also keep the majority of air from entering the coolant system dramatically reducing the effort required to remove air bubbles later. It will fit all ATV and UTV applications and great to use on radiator hoses. Kits are sold in a pair.
- It seals-off flexible hoses up to 2" inch in diameter
- 10" in overall length
- Dimensions 12.5 x 3.5 x 1 inches
Heater FAQ and Videos
