A heater for the Honda Talon, 2019–2026
This Ice Crusher heater kit is built specifically for the Honda Talon — not a universal heater adapted to fit. It puts 14,600 BTU of engine-coolant heat through 6 adjustable vents, including dedicated windshield defrost. The heater unit mounts in the center of vehicle behind radiator. Because it runs on engine coolant, it makes real heat without draining your battery; the fan draws about what a factory blower does.
Fits
- 2019–2026 Honda Talon, 2-seat and 4-seat models (see the year list below)
By model year:
- 2026 Talon
- 2025 Talon
- 2024 Talon
- 2023 Talon
- 2022 Talon
- 2021 Talon
- 2020 Talon
- 2019 Talon
Not for: The Honda Pioneer line, which has its own kits on the Honda heater page.
Specs
| Heat output | 14,600 BTU |
|---|---|
| Airflow | 180 CFM |
| Vents | 6 adjustable, including defrost |
| Windshield defrost | Yes |
| Fan | Single |
| Heater size | 10 × 7.5 × 4.5 in |
| Mounts | Center of the vehicle, behind the radiator |
| Works with | Factory windshield wiper and washer fluid tank |
| Install time | 4–8 hours |
| Warranty | 3 years, whole kit |
What’s in the box
- Heater unit with fan
- 6 adjustable vents, including defrost vents
- Coolant hose, cut to length for one or two seat rows
- Fittings and mounting hardware
- The specialty tools the install needs
- Picture-rich, step-by-step instructions written for the average do-it-yourselfer
Installation
The heater mounts in the center of the vehicle behind the radiator and works alongside the factory windshield wiper and washer tank. You tap into the engine coolant and route the hose to the heater; the instructions show every step with pictures. Basic hand tools do the job.
Options
Seat rows: Pick one or two rows of seats so we pack the right length of coolant hose. The price doesn’t change.
Talon 2-seat
Talon 4-seat
Auxiliary coolant pump (+$99.99): At idle and low RPM, the pump boosts coolant flow through the heater core so more heat reaches the cab.
Hose clamp tools (+$24.99): A pair of clamp-off pliers that seal hoses up to 2 inches, so the coolant tie-in stays clean. Handy on radiator hoses too.
Questions we hear
Does it work with the factory wiper and washer tank?
Yes. The kit is designed around them.
What does the auxiliary coolant pump do?
At idle and low RPM it boosts coolant flow through the heater core, so more heat reaches the cab. It’s optional.
Will it drain my battery?
No. The heat comes from your engine’s coolant, not the battery. The fan draws about what a factory blower does.
How long does the install take?
Plan on 4–8 hours depending on experience. Experienced do-it-yourselfers land at the low end; first-timers should set aside a full day and follow the picture-rich instructions step by step.
Do I need the hose clamp tools?
You can install without them, but they make the coolant tie-in faster and cleaner. They pinch the hoses shut so coolant doesn’t pour out, and less air gets into the system, which makes bleeding the air out much easier. Sold as a pair; they fit hoses up to 2 inches.
Why buy an Ice Crusher heater
We’re not the cheapest UTV heater. We’re the one designed, supported and shipped by the people who answer the phone. Every kit is built for a specific machine, comes complete, and is backed by real people who know it inside and out. And we keep improving our kits, even when it means retiring our own older designs.
Warranty, support and shipping
3-year warranty on the whole kit, electrical included. If something goes wrong, tell us the problem and we make it right. Tech support is unlimited and free for as long as you own the heater: call 888-964-0135 and a real person in Minnesota answers.
Free shipping in the lower 48. Order by noon CT, Monday through Friday, and it ships the same day. Canada: $30–$50 per heater freight depending on province; duties, taxes and brokerage are extra.
More help: Heater FAQ · Install videos on YouTube
- Legacy SKU:
- ICCH-UD-C-HONDATAL_194
