Are frosted windshields and bone-chilling seats stealing joy from your outdoor activities? Ice Crusher UTV Heaters has you covered! All Ice Crusher Heater Kits are developed with the average Do-It-Yourselfer in mind.
This kit includes all hardware, fittings, hoses, and specialty tools. Picture-rich instructions will guide you step-by-step through installation. With adjustable vents and a high CFM blower, you'll find ample heat to defrost the windshield and heat up your hands and feet.
You'll never be stranded during installation because our Minnesota-based technical support team is ready to help! Put the fun back in your outdoor activities with an Ice Crusher UTV Heater.
UTV Cab Heater Fitment:
| 2014 Prowler 550 | 2013 Prowler 550 | 2012 Prowler 550 | 2011 Prowler 550 | 2010 Prowler 550 | 2009 Prowler 550 |
Heater Features:
- 14,600 BTU output
- CFM: 180
- Heater unit dimensions (10 x 10 x 4.5)
- Mounts under the center dash
- Vents: 5
- Defrost: Yes
- Get 10 to 15 degrees more heat with the addition of the MaxStat
MaxStat - Inline Coolant Bypass Thermostat Option:
All heaters in the industry perform as a function of how hot the coolant is and how much coolant is flowing through the heater core. As the radiator cools down the engine, it causes the engine thermostat to close, which cuts off all coolant flow to the heater core. The MaxStat adds a secondary inline thermostat (180F Standard) to the vehicle’s coolant system, which diverts coolant to the heater core when the engine thermostat would otherwise have closed down. Essentially it eliminates the thermal cycling that affects almost all heaters in the market. Optional 192F thermostat is available if requested before shipping.
- MaxStat Size: 3/4" (19mm)
Hose Clamp Off Pliers Option:
Make your heater install faster and easier with Ice Crusher Hose Clamp Off Pliers. These clamp off pliers will keep coolant from pouring out of your vehicle when tying into the coolant system. They also keep the majority of air from entering the coolant system dramatically reducing the effort required to remove air bubbles later. It will fit all ATV and UTV applications and great to use on radiator hoses. Kits are sold in a pair.
- It seals-off flexible hoses up to 2" inch in diameter
- 10" in overall length
- Dimensions 12.5 x 3.5 x 1 inches
Heater FAQ and Videos
