
Ice Crusher builds three heater kits for the Coleman 400, 500 or 700. Each kit is designed around the machine, runs on engine coolant so there is no battery drain beyond the fan, and ships complete with hardware, hose, fittings and picture-rich instructions — backed by unlimited phone support from Minnesota.
| Machine | Years | Kit | Heat | Vents | Defrost | Price |
|---|---|---|---|---|---|---|
| Coleman 400 | 2016–2025 | Coleman 400 Heater Kit | 14,600 BTU | 2 | No | $399.99 |
| Coleman 500 | 2014–2025 | Coleman 500 Heater Kit | 14,600 BTU | 2 | No | $379.99 |
| Coleman 700 | 2014–2025 | Coleman 700 Heater Kit | 14,600 BTU | 2 | No | $379.99 |

Every kit ships the same business day from Minnesota with the heater, vents, hose, fittings, hardware, specialty tools and picture-rich instructions.
Coleman 400 (2016–2025): mounts under the center dash, 2 vents, no dedicated defrost vents (a compact heater that warms the cab), 14,600 BTU.
Coleman 500 (2014–2025): mounts under the center dash, 2 vents, no dedicated defrost vents (a compact heater that warms the cab), 14,600 BTU.
Coleman 700 (2014–2025): mounts under the center dash, 2 vents, no dedicated defrost vents (a compact heater that warms the cab), 14,600 BTU.
Plan on four to eight hours with hand tools, depending on experience. All the hardware, fittings, hose and specialty tools are in the box, and the instructions walk the install step by step with photos. Call 888-964-0135 if you have a question mid-install — unlimited tech support comes with every kit.

The MaxStat is our inline coolant bypass thermostat. It adds 10 to 15 degrees of cab heat by keeping hot coolant moving through the heater core, and it stops the engine thermostat from cycling open and closed so quickly, so the heat in the cab stays steady instead of rising and falling. It is a checkout option on every Coleman kit.
These are compact two-vent heaters that warm the cab. They do not have dedicated defrost vents; call us if windshield defrost is a must for you.
No. The heat comes from engine coolant; the fan draws about what a factory blower does.
Yes. Heater, vents, hose, fittings, hardware, specialty tools and picture-rich instructions, plus unlimited phone support at 888-964-0135.

No — you can install the kit without them. But they make the job significantly cleaner and quicker, because you don't have to drain the coolant before cutting into the radiator hoses: clamp the hose off on each side, make the cut, and very little coolant is lost and very little air gets in. They are a $24.99 option at checkout on the kit page.